Retoflex(热得福)高温蒸煮膜_Retoflex(热得福)高温蒸煮膜系列_浙江诚信包装有限公司

上海11选5分布走势图

Retoflex(热得福)高温蒸煮膜系列

Retoflex(热得福)高温蒸煮膜

Retoflex(热得福)高温蒸煮膜

产品描述

Product Description

本品为耐高温薄膜材料复合加工而成的复合高温蒸煮膜、袋。

This product is a composite high temperature cooking film and bag, which is made of high temperature film material.

产品特点

Product

Features

1、 不含塑化剂,低溶剂残留、无异味,安全卫生;

No plasticizer, low solvent residue, no odor, safe and hygienic。

2、 适合抽真空,材质柔软,强度高,热封性好;

Suitable for vacuum pumping, soft material, high strength and good heat sealing.

3、 采用耐高温蒸煮材料复合,可耐高温蒸煮;

The material is made of high temperature resistant cooking material and can be cooked at high temperature.

4、 抗穿刺强度高;

High puncture resistance.

5、 氧气阻隔性强,保香性好;

The oxygen barrier is strong and the fragrance is good.

6、 适用热成型自动包装设备,抽真空包装后包装袋表面贴体、平整。

It is suitable for hot forming automatic packaging equipment. After vacuum packaging, the surface of the packaging bags is fitted and smoothed.

 技术指标

Technical 

Indexes

1、 适合100℃~135℃高温蒸煮杀菌使用。

It is suitable for cooking and sterilizing at 100 to 135 degrees.

2、 剥离强度≥2.5N/15mm、热封强度≥50N/15mm。

The peel strength is more than 2.5N/15mm, and the heat sealing strength is more than 50N/15mm.

其他功能性指标可由供需双方共同商定。

Other functional indicators can be agreed by the supplier and the buyer.

典型结构有,NY/NY/RCPP、PET/AL/NY/RCPP、NY/RCPP、NY/AL/RCPP。

Typical structures are NY/NY/RCPP, PET/AL/NY/RCPP, NY/RCPP and NY/AL/RCPP.

使用方法

Usage Method

常压或抽真空状态下填装、热封,在大型杀菌锅或自动杀菌釜中做高温蒸煮杀菌使用。

Filling and heat sealing under normal pressure or vacuum, cooking and sterilizing at high temperature in large sterilizing pot or autoclave。

è 用途Purpose

主要用于粽子、肉类熟食、酱料等食品包装。Mainly used for dumplings, meat cooked food, sauce and other food packaging.

è 注意事项

Matters Needing Attention

装车时应小心轻放、防止机械碰撞。中途停车时,不允许停在烈日下,防止暴晒,应停在阴凉处,卸货时也应在阴凉处,以免造成产品老化;

When loading the car, be careful to light and prevent the mechanical collision. When stopping in the middle of the road, it is not allowed to stop in the sun and prevent insolation. It should be stopped in the cool place and the unloading should be in the cool place, so as to avoid the shrinkage and deformation of the products.

●贮存条件应放置在温度不超过35℃在整洁、干燥通风、阴凉的库房内,妥善堆放,距离热源大于2m,不能受强光直射;

This product should be placed at storage conditions, which temperature is not more than 35 degrees。 In a clean, dry, ventilated and cool storehouse, it should be stacked properly。 The distance from the heat source is greater than 2m。

●使用时应现取现用,不得长时间放置在高温车间内。

When used, it should be used now and should not be placed in a high temperature workshop for a long time.

上海11选5 上海11选5开奖结果 上海11选5走势图 福运彩票平台 易玩棋牌app下载 上海11选5分布走势图 易玩棋牌app下载 上海11选5走势图 悠洋棋牌 上海11选5走势图

{@sdcms:page table="View_info" where="classid in({sdcms:class_allclassid}) and ispass=1" order="Ontop desc,id desc"} {@eof} {/@eof} {/@sdcms:page}